Foam Block Machine Factory

Product Detail

Main advance:
1. All block mold frames are treated by heat-treatment to ensure strength.
2. Taiwan original hydraulic station and all good quality parts.
1.Machine structure:
a, The machine mold are welded by strong rectangle tube and steel plate make high strength to keep
more safety of the machine;
b, All block mold frames are treated by heat-treatment to release the welding stress, so that the
frames would not deformed;
c, After heating treatment, all mold frames are processed by sand blasting treatment to keep the rust away, then under coat and finishing coat are greatly improved anticorrosion performance and
long life;
d, Adopts three Germany gauges and safety valve for multi-safety protection. The machine will be
tested by water pressure and steam (many steps), ensure the machine more stable and safety.
2.Steam system:Three ball valves, comparing one big steam valve, saves 20% steam, with ISOstandard butterfly valves, greatly improve stability and long life;
3.Control system:
a, Adopts PLC( Mitsubishi) and touch screen ( Schneider) for an easy operation;
b, Equipped material level sensor to control the filling. The block cooling is controlled by foam
pressure sensor, The whole procedure for filling, heating, cooling will be automatically by PLC.




Item		LWB2000V	LWB3000V	LWB4000V	LWB6000V
Mould Cavity Size (mm)		2040*1240*1030	3060*1240*1030	4080*1240*1030	6100*1240*1030
Block Size(mm)		2000*1200*1000	3000*1200*1000	4000*1200*1000	6000*1200*1000
Steam	Entry	DN80	DN80	DN100	DN150
	Consumption	25~45kg/cycle	45~65 kg/cycle	60~85 kg/cycle	95~120 kg/cycle
	Pressure	0.6~0.8Mpa	0.6~0.8 Mpa	0.6~0.8 Mpa	0.6~0.8 Mpa
Compressed      Air	Entry	DN40	DN40	DN50	DN50
	Consumption	1.5~2m3/cycle	1.5~2.5m3/cycle	1.8~2.5 m3/cycle	2~3m3/cycle
	Pressure	0.6~0.8 Mpa	0.6~0.8 Mpa	0.6~0.8 Mpa	0.6~0.8 Mpa
Vacuum cooling water	Entry	DN40	DN40	DN40	DN40
	Consumption	0.4m3/cycle	0.6m3/cycle	0.8m3/cycle	1m3/cycle
	Pressure	0.2~0.4 Mpa	0.2~0.4 Mpa	0.2~0.4 Mpa	0.2~0.4 Mpa
Drainage	Vacuum drain	DN100	DN125	DN125	DN150
	Down steam drain	DN100	DN125	DN150	DN150
	Blower drain	DN100	DN100	DN150	DN150
Capacity @15kg/m³		4min/cycle	5 min/cycle	6 min/cycle	8 min/cycle
Connected Load/Power		19.75KW	23.75 KW	24.5 KW	32.25 KW
Overall Dimension      (mm)		5700*4000*2800	7200*4500*3000	11000*4500*3000	12600*4500*3100
Weight		5000kg	6500kg	10000kg	14000kg
Other sizes also available



Applications of Foam Block Machine 

 

 




LONGWELL, with over 20 years experience, is one of the largest auto vacuum block moulding machine manufacturers and suppliers in China. With the help of advanced equipment and technology, all of our products are of high quality and low price. Welcome to buy the cheap customized machine from our factory.